Resonac D

Home | Contact Us

Building Application | Marine Application

Building Applications :

Resonac D
Water Based Vibration Damping Compound

STANDARD PRODUCT CODES

Standard Product	Standard Pack Sizes	Weight
Resonac D-020	20 litres	22kg

FLAMMABILITY PROPERTIES

Material	UL94	MVSS-302	SAEJ369a	AS1530.3
				Ignitability	Spread of Flame	Heat Evolved	Smoke Develop
Resonac D	N.T.	Self Exting.	Self Exting.	0	0	0	4

DYNAMIC PROPERTIES

Material	Loss Factor 25ºC, 100Hz	Quality Factor 25ºC, 100Hz	Critical Damping Ratio	Reverberation Time 25ºC, 10Hz	Damping Band Width 25ºC, 100Hz	Material Decay Rate dB/SEC

Resonac D	0.75	1.42	0.25	0.31	75	1911

GEIGER PLATE TEST RESULTS

Material	Thickness(mm)	Decay Rate(dB/sec,at)
		25ºC	40ºC	60ºC
Resonac D	1.41	44	16	10
	0.88	22	7	3
	0.71	16	7	5

Note: Tested to AS1937. 10-1977: Determination of damping coefficient by the thick plate method. The Decay rate increases as thickness increases to meet your specified decay rate, ring out engineers for the required thickness.

MISCELLANEOUS PROPERTIES

Material	Colour	Specific Gravity	Recommended Operating Temp. Range	Service Temp. Range	Solid Content By Mass

Resonac D	Dark Grey*	1.35 (Dry Film)	0-60ºC	-10ºC-100ºC	73%

* Other colours are available and minimum order quantity applies

RESISTANCE

Material	UV	H2O	Petrol	Diesel	10% HCL Solution	10% NaOH Solution
Resonac D	Excellent	Excellent	Good	Good	Good	Good

COATING THICKNESS (WET FILM)

Subtrate	Impact Excitation	Stedy Vibration
Aluminium	>= 0.5 x T	>= 0.7 x T
Steel	>= 0.7 x T	>= 1.4 x T
Plastic	>= 0.3 x T	>= 0.5 x T

Note:
1. T = Substrate Thickness
2. Maximum 3mm wet film per coat. Allow to dry before next application.
3. Drying time at 20ºC for 3 mm thickness coating is 24 hours approximately.

Resonac D : Page 1 | Page 2 | Page 3 | Page 4

Home | Contact Us